Set up
Setting up your Ice9
Six steps, about ten minutes, all from your phone. The card that came in the box has its hotspot name, password and address.
-
Plug it in near the aircon.
Any USB socket close to the aircon will do.
-
Join its setup hotspot.
Scan the QR code on the card, or join the WiFi network named on the card and enter its password.
-
Put it on your van's WiFi.
The setup page should open by itself. If it doesn't, go to 192.168.4.1. Choose your van's WiFi, enter its password and save. The hotspot then switches off.
Only ever your van's own WiFi. Ice9's page has no login, so never put it on a campsite or public network.
-
Open its page.
On any phone on the van's WiFi, go to the address on the card (it ends in .local) and add it to your home screen.
On Android, and it won't open? Android doesn't always open .local addresses. Look in your router's list of devices for one called dometic-ac- and six characters, the same name as the hotspot on your card. Use its IP address instead.
-
Pair it with the aircon.
Close Dometic's own app on every phone nearby: the aircon only talks to one thing at a time. Then, on the aircon's control panel, hold + and − together for 3 seconds, until it shows BL. Ice9 finds it and pairs by itself, usually in a few seconds, and the "Pairing" line on its page says "Connected".
The aircon only stays in pairing mode for about a minute. If nothing happens, hold the buttons again.
Got an FJX4? It doesn't announce itself, so tell Ice9 its name first. On Ice9's page, find your aircon under "AC units nearby". Its name starts SHE_. Type that name into "AC name to pair with" and press Enter. Then hold + and − on the panel.
-
On an iPhone? Add the shortcut.
This one is optional. Open the link on your iPhone and tap "Add Shortcut". It appears in the Shortcuts app as "Aircon". Tap the three dots on it, and change the first box to the address from step 4.
Connecting it to something else
None of this is needed. Ice9's own page is a complete remote.
Victron GX
Puts the aircon on your Cerbo or Ekrano as switches, and in VRM. It needs Venus OS Large with Node-RED switched on, and on Venus OS 3.x the GX's network security profile set to "Unsecured". Your installer can set this up.
Home Assistant
Home Assistant should find Ice9 by itself. Adopt it and the aircon is an ordinary climate device.
From outside the van
With a Victron GX, the aircon is in VRM wherever you have signal. With a VPN into the van, Ice9's page and the shortcut work too: use its IP address, not the .local one. The van has to be online, and the aircon needs mains power.
Stuck part-way? Find the fix